Harley Davidson Heated Grips Fuse Location

Just for grins check the heated grip switch.

Harley davidson heated grips fuse location. You can access that by removing the bolt on the back of the seat and sliding the seat off. Sometimes I find mine just slightly on from me having bumped it with my hand or someone admiring the bike and putting finger where they shouldnt. Shop motorcycle grips at the official harley davidson online store.

On some models see attachment the circuit is used and a 15 amp fuse is inserted. Push the grip fully onto the handlebar. I get battery voltage everywhere I check.

Pulled the left grip this evening and checked for continuity at the connector going to the right grip. How to Install Harley Davidson Heated grips on 2014 to. If no power to the back of the lights then the problem exists in your lighting switches.

Harley-Davidson heated handgrips just stopped working. That circuit also drives optional heated hand grips. Position the lower switch housing beneath the grip so that the grooves 2 on the outboard side of the switch housing fit over the flange on the end of the grip.

Checked fuse and fuse is ok. If you follow the rudder hose that exits the rear right side of your oil tank it leads to the bottom of the frame under this is the oil plug. Position the left-side heated grip 4 so the larger diameter portion of the flange 5 is at the bottom.

Route the heated hand grip wires over to the Electrical Connection Harness. You say there is power at the fuse. DO NOT cut off the in-line fuse holder on the red wire but cut the wires to a suitable length to easily reach the sealed splice connectors on the Electrical Connection Harness.